Lexmark Z12 Color Jetprinter User's Guide for Macintosh (2.5 MB) - Page 47
Printer is plugged in but doesn’t print
View all Lexmark Z12 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Steps to basic printing Maintaining your printer Troubleshooting Appendix Index Troubleshooting Printer is plugged in but doesn't print Make sure: • The printer is turned on. • Paper is loaded correctly. • The USB cable is completely plugged into the printer. • The printer is set as the default printer. To check the printer status: 1 Double-click the Lexmark Z12 printer icon on your desktop. 2 From the menu bar, choose Printing. 3 Make sure Set Default Printer is checked. • The print job is not being held in the print queue. To check the printer status: 1 From the desktop, double-click the Lexmark Z12 icon. 2 From the menu bar, choose Printing. 3 Choose Start Print Queue. Print a test page. If the test page prints, the printer is functioning properly. If the printer still doesn't print, check your application. 47