LiftMaster CAPXLV Installation Manual - English French Spanish - Page 13
Mount CAPXL / CAPXLV, Pedestal Mount, Surface Mount, Recess Mount
View all LiftMaster CAPXLV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
INTRODUCTION PRE-INSTALL INSTALL NETWORK ACCESS CONTROL 2 Mount CAPXL / CAPXLV DO Make sure the CAPXL / CAPXLV is properly 1. Attach the goose-neck gasket (provided) if mounting to a goose-neck. sealed to prevent damage to the CAPXL / 2. Mount the CAPXL / CAPXLV securely to a flat surface or pedestal with CAPXLV from moisture. appropriate hardware taking care to route wiring through appropriate knockouts. Stainless steel hardware is recommended to mount the CAPXL / CAPXLV. Use of zinc plated or galvanized hardware is at risk for galvanic corrosion. NOTES: -Ensure the cover can fully open to allow access after the installation is complete. -ADA Compliance: When mounting the CAPXL / CAPXLV at a pedestrian entrance, to meet ADA compliance, mount the top of the CAPXL / CAPXLV screen no higher than 54 inches from the ground. Pedestal Mount Surface Mount 1/4" x 1-1/2" Ribbed Neck Security Bolt (4) Goose-neck Gasket Recess Mount Optional Back Box and Trim Kit (Model CAPXLTK) Security+ 2.0® Radio Antenna Wi-Fi® Antenna Optional Wi-Fi® Antenna Extension (Model WFAEXT) 13 Optional Radio Antenna Extension (Model 86LM)