LiftMaster CAPXLV Installation Manual - English French Spanish - Page 25
Auto-Call Feature, Disconnect power BEFORE making electrical connections.
View all LiftMaster CAPXLV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
INTRODUCTION PRE-INSTALL INSTALL NETWORK ACCESS CONTROL Auto-Call Feature Disconnect power BEFORE making electrical connections. The Loop Detector Board (model LPEXP, not provided) combined with the LOOPDETLM, provides Auto Call functionality that is available through the auxiliary switch setting. The LPEXP and LOOPDETLM can be purchased together as a kit (LPEXPKIT). When the loop detects a vehicle the number programmed into the "Quick call" field in myQ® Business™ is automatically dialed. 1. Secure the Loop Detector Board (model LPEXP) to the standoffs in the CAPXL / CAPXLV with the provided screws. 2. Connect the wire harness from the Loop Detector Board to the Power/Internet Board. 3. Connect the loop wires to the input on the Loop Detector Board. 4. Plug in the loop detector (model LOOPDETLM). 5. Set both switches on the Loop Detector Board to ON (auxiliary setting). 6. Activate the loop input in the CAPXL / CAPXLV main Admin screen (Toggle dip switch #1) Wire Harness LOOP MODE EXIT INTERRUPT SHADOW AUXILIARY SW1 SW2 Not supported Not supported Not supported ON ON LOOP DETECTOR BOARD ON Switches ON Plug-in Loop Detector Model LOOPDETLM Loop Wiring NOTE: Loop Detector Board not evaluated by UL. For myQ® Business™ programming please visit www.myqbusiness.com. 25