LiftMaster H J- LOGIC 3 Manual - Page 40
Control Connection Diagram
View all LiftMaster H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
CONTROL CONNECTION DIAGRAM IMPORTANT NOTES: 1. The 3-Button Control Station provided must be connected for operation. 2. If a STOP button is not used, a jumper must be placed between terminals 4 and 5. 3. When adding accessories, install them one at a time and test each one after it is added to ensure proper installation and operation with the Commercial Door Operator. 3 BUTTON STATION OR 3 POSITION KEYSWITCH WITH SPRING RETURN TO CENTER AND STOP BUTTON STANDARD 10 7 6 4 5 2 OR MORE 10 7 6 4 5 KEY LOCKOUT 10 7 6 4 5 (RED) (RED) (RED) Open Open Maintenance Open Open Maintenance Alert LED Close Maintenance Alert LED Close Close Alert LED Close Stop (WHITE) Stop (WHITE) (WHITE) Stop Stop 2 BUTTON STATION OR 3 POSITION KEYSWITCH WITH SPRING RETURN TO CENTER STANDARD 764 764 2 OR MORE Keyswitch D1 & E2 MODE ONLY Open See note 2. Close 1 BUTTON STATION OR ANY AUXILIARY DEVICE OPEN / CLOSE 14 B2, T, TS & FSTS MODE ONLY See note 2. Open Open Close Close RADIO CONTROLS OPEN / CLOSE R1 R2 R3 D1 & E2 MODE ONLY See note 2. Any Commercial Type LiftMaster Brand Receiver SENSING DEVICE TO REVERSE OR STOP Note: 11 and 4 are both the same common. Either is acceptable. 11 8 EXTERNAL INTERLOCK Remove Factory Installed Jumper When Interlock is Used 2 3 2 3 01-19457H Sensing Device ONE ©2008, The Chamberlain Group, Inc. All Rights Reserved 2 OR MORE All Wiring Types