LiftMaster RSL12V RSL12V Installation Manual - Page 9
Introduction - solar
View all LiftMaster RSL12V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INTRODUCTION » OPERATOR SPECIFICATIONS + CARTON INVENTORY + HARDWARE INVENTORY OPERATOR SPECIFICATIONS This model is intended for use in vehicular slide gate applications: Gate Classifications: CLASS I & II SIDE VIEW REAR VIEW Main Supply (Motor): 12 Vdc Accessory Power: 12 V nominal Class II battery voltage source is limited to: • Solar or AC Cable up to 50 feet - 500 mA • AC Cable 50 feet up to 250 feet - 250 mA 20-3/8" 20-3/8" Current Consumption: • AC Cable 250 feet up to 1000 feet - 100 mA NOTE: Increased accessory power drawn from the operator will shorten the battery life. 5 Amps at 120 Vac 10-1/2" 5-4/5" 15-3/16" Battery Charger Supply: 13.5 Vac, 30 Va, Direct Plug in Power Supply, Class II Compliant Heater Draw (Optional): 325 watts Main AC Supply: 120 Vac DC Absorbed Power: 2 Amps Solar Power Max: Maximum Gate Speed: 12 V at 30 watts max. 1 foot/second 24" 20-1/2" Maximum Gate Weight: 800 lb. 7-1/4" Daily Cycle Rate using transformer power: 120 cycles/day Maximum Gate Travel Distance: Temperature: 25 feet max. (Single Gate) NOTE: The operator is equipped for a 20 foot standard gate, to obtain 25 feet an additional chain is required. 40 feet (Dual Gate) -20°C to 40°C (-4°F to 104°F) without Heater -40°C to 40°C (-40°F to 104°F) with Heater 16-3/5" 16-4/5" MOUNTING FOOTPRINT Control Board Fuse: 30 Amp (2) CARTON INVENTORY • Operator • Transformer • Documentation Packet • Battery 12 Vdc 7AH (1) .63" 7.49" (Electrical Box) HARDWARE INVENTORY • Warning Signs (2) • Warranty Card • Chain #41 - 30 feet • Eye Bolt Kit 13.65" 8