Linksys BEFCMU10 User Guide - Page 8
Front Panel LEDs, Power, Internet, Online, DS, US, Ethernet, Front Panel - drivers
UPC - 745883551866
View all Linksys BEFCMU10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Cable Modem with USB and Ethernet Connections Front Panel LEDs The Cable Modem's LEDs are located on the front panel. Figure 2-2: Front Panel Power Green. The Power LED lights up when the Cable Modem is powered on. It stays solid after the self-test. If the LED lights up red, the self-test has failed. Internet, Online Green. The Online LED flashes when the Cable Modem is establishing a connection to your cable ISP. It is solidly lit when the Cable Modem is synchronized with your cable ISP. Internet, DS Green. The DS (Downstream) LED lights up and flashes when the Cable Modem is trying to lock on a downstream signal. The LED stays solid when it has locked on the signal. Internet, US Green. The US (Upstream) LED lights up and flashes when the Cable Modem is trying to lock on an upstream signal. The LED stays solid when it has locked on the signal. Ethernet Green. The Ethernet LED lights up when the Cable Modem is connected to your computer or network through the Ethernet port. It flashes when there is activity on the Ethernet port. The LED will light up orange when there is a data collision. USB Green. The USB LED lights up when the Cable Modem is connected to your computer or network through the USB port. It flashes when there is activity on the USB port. The LED will light up orange when the USB is connected and before the driver is installed. NOTE: If the US and DS LEDs are flashing, the modem is still operating, but your Internet service has been disabled by your Internet Service Provider. NOTE: If the US, DS, and Online LEDs are flashing, the modem is performing a self-test. Chapter 2: Getting to Know the Cable Modem 4 Front Panel LEDs