Linksys DMC350 User Guide - Page 63

National Restrictions, Third-Party Software or Firmware

Page 63 highlights

Wireless Home Audio National Restrictions In the majority of the EU and other European countries, the 2.4 GHz and the 5.0 GHz bands have been made available for the use of wireless local area networks (LANs). The table labeled "Table A - Regulatory Requirements for Wireless LANs" provides an overview of the regulatory requirements applicable for the 2.4 GHz and the 5.0 GHz bands. The requirements for any country may evolve. Linksys recommends that end-user check with the local authorities for the latest status of their national regulations for both the 2.4 GHz and the 5.0 GHz. Table A-Regulatory Requirements for Wireless LANs Frequency Max Power Level Indoor Indoor & Band (MHz) (EIRP) (mW) ONLY Outdoor 2400-2483.5 100 X 5150-5250 200 X 5250-5350† 200 X 5470-5725† 1000 X ††Dynamic Frequency Selection (DFS) and Transmit Power Control (TCP) are required in the frequency ranges of 5250-5350 MHz and 5470-5725 MHz. DFS: This function is required by the national regulations to avoid interference with the Radio Location Services (radars) when operating in the 5.250-5.350 GHz & 5.4705.725 GHz bands. This Wireless-N Desktop Radio model DMC350 complies with the DFS requirements as defined in ETSI/EN 301-893. TPC: For operation in the 5.0 GHz band, the maximum power level is 3 dB or more below the applicable limit. As such, TPC is not required. This product contains a wireless-N, -G, -B, and/or -A transceiver, intended for use in all EU countries, and all other countries following EU directive 1999/5/EC, without any limitation except for any country listed in the restriction of use below: Ce produit contient un sans fil-N, - G, - B, et/ou - A émetteur récepteur, destiné à l'utilisation dans tous les pays de l'UE, et tous autres pays après l'UE 1999/5/EC directif, sans n'importe quelle limitation excepté n'importe quel pays énuméré dans la restriction de l'utilisation ci-dessous : Dieses Produkt enthält ein drahtloses-n, - G, - ein B und/oder - ein Lautsprecherempfänger, bestimmt für Gebrauch in allen EU-Ländern und in allen weiteren Ländern nach EU richtungweisendes 1999/5/EC, ohne irgendeine Beschränkung außer jedem möglichem Land, das nachstehend in der Beschränkung des Gebrauches aufgeführt wird: Conductor/Wireless-N Digital Music Center Regulatory Information Cer produit zahlt contient un sans fil-N, - G, - B, et/ou - ein émetteur récepteur, destiné à l'utilisation dans tous les de L'UE, und zahlt tous autres après l'UE 1999/5/EC directif, sans, n'importe quelle Beschränkung excepté n'importe, das quel énuméré dans la restriction de L'utilisation Cidessous zahlt: Croatia In Croatia, license is required in the band 5150-5350 MHz. France In France, outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz. For detailed information, the enduser should contact the national spectrum authority in France or visit http://www.arcep.fr/ Denmark In Denmark, the band 5150-5350 MHz is also allowed for outdoor usage. Italy In Italy, if used outside of own premises, "general authorization" is required within the band 5150-5350 MHz & 5470-5725 MHz. For detailed information on applying for license, the end-user should contact the national spectrum authorities in Italy or visit http://www.comunicazioni.it/it/ Latvia In Latvia, outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. For detailed information, please visit http://www.esd.lv Notes: 1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries. 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm). Third-Party Software or Firmware The use of software or firmware not supported/provided by Linksys may result that the equipment is no longer compliant with the regulatory requirements. Technical Documents on www.linksysbycisco.com/international Follow these steps to access technical documents: 1. Enter http://www.linksysbycisco.com/international in your web browser. 2. Select the country or region in which you live. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

Regulatory Information
57
Wireless Home Audio
Conductor/Wireless-N Digital Music Center
National Restrictions
In the majority of the EU and other European countries,
the 2.4 GHz and the 5.0 GHz bands have been made
available for the use of wireless local area networks (LANs).
The table labeled “Table A - Regulatory Requirements for
Wireless LANs” provides an overview of the regulatory
requirements applicable for the 2.4 GHz and the 5.0 GHz
bands.
The requirements for any country may evolve. Linksys
recommends that end-user check with the local authorities
for the latest status of their national regulations for both
the 2.4 GHz and the 5.0 GHz.
Table A–Regulatory Requirements for Wireless LANs
Frequency
Band (MHz)
Max Power Level
(EIRP) (mW)
Indoor
ONLY
Indoor &
Outdoor
2400-2483.5
100
X
5150-5250
200
X
5250-5350
200
X
5470-5725
1000
X
Dynamic Frequency Selection (DFS) and Transmit Power Control
(TCP) are required in the frequency ranges of 5250-5350 MHz and
5470-5725 MHz.
DFS: This function is required by the national regulations
to avoid interference with the Radio Location Services
(radars) when operating in the 5.250-5.350 GHz & 5.470-
5.725 GHz bands.
This Wireless-N Desktop Radio model DMC350 complies
with the DFS requirements as defined in ETSI/EN 301-893.
TPC: For operation in the 5.0 GHz band, the maximum
power level is 3 dB or more below the applicable limit. As
such, TPC is not required.
This product contains a wireless-N, -G, -B, and/or –A
transceiver, intended for use in all EU countries, and
all other countries following EU directive 1999/5/EC,
without any limitation except for any country listed in the
restriction of use below:
Ce produit contient un sans fil-N, - G, - B, et/ou - A émetteur
récepteur, destiné à l’utilisation dans tous les pays de l’UE,
et tous autres pays après l’UE 1999/5/EC directif, sans
n’importe quelle limitation excepté n’importe quel pays
énuméré dans la restriction de l’utilisation ci-dessous :
Dieses Produkt enthält ein drahtloses-n, - G, - ein B
und/oder - ein Lautsprecherempfänger, bestimmt für
Gebrauch in allen EU-Ländern und in allen weiteren
Ländern nach EU richtungweisendes 1999/5/EC, ohne
irgendeine Beschränkung außer jedem möglichem Land,
das nachstehend in der Beschränkung des Gebrauches
aufgeführt wird:
Cer produit zahlt contient un sans fil-N, - G, - B, et/ou - ein
émetteur récepteur, destiné à l’utilisation dans tous les de
L’UE, und zahlt tous autres après l’UE 1999/5/EC directif,
sans, n’importe quelle Beschränkung excepté n’importe,
das quel énuméré dans la restriction de L’utilisation Ci-
dessous zahlt:
Croatia
In Croatia, license is required in the band 5150-5350 MHz.
France
In France, outdoor use limited to 10 mW e.i.r.p. within the
band 2454-2483.5 MHz. For detailed information, the end-
user should contact the national spectrum authority in
France or visit
Denmark
In Denmark, the band 5150-5350 MHz is also allowed for
outdoor usage.
Italy
In Italy, if used outside of own premises, “general
authorization” is required within the band 5150-5350
MHz & 5470-5725 MHz. For detailed information on
applying
for
license,
the
end-user
should
contact
the
national
spectrum
authorities
in
Italy
or
visit
Latvia
In Latvia, outdoor usage of the 2,4 GHz band requires an
authorization from the Electronic Communications Office.
For detailed information, please visit
Notes:
1.
Although Norway, Switzerland and Liechtenstein are not EU
member states, the EU Directive 1999/5/EC has also been
implemented in those countries.
2.
The regulatory limits for maximum output power are
specified in EIRP. The EIRP level of a device can be calculated
by adding the gain of the antenna used (specified in dBi) to
the output power available at the connector (specified in
dBm).
Third-Party Software or Firmware
The use of software or firmware not supported/provided
by Linksys may result that the equipment is no longer
compliant with the regulatory requirements.
Technical Documents on
www.linksysbycisco.com/international
Follow these steps to access technical documents:
your web browser.
2.
Select the country or region in which you live.