Linksys SPA942 Cisco Small Business IP Phone SPA9X1 Administration Guide - Page 41
Set Static Gateway IP - dhcp option
UPC - 745883569113
View all Linksys SPA942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Using the Interactive Voice Response Interface Table 2-2 IVR Options (continued) Set Static IP Address 111 Check Network Mask 120 Set Network Mask 121 Check Static Gateway IP 130 Address Set Static Gateway IP 131 Address Check MAC Address 140 Check Firmware Version 150 Check Primary DNS 160 Server Setting Set Primary DNS Server 161 Check administration web 170 server port Check LAN IP Address 210 Check PBX multicast 180 address Set PBX multicast 181 address Enable/Disable 7932 administration web server Chapter 2 Getting Started Enter IP address using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. DHCP must be "Disabled," otherwise you hear, "Invalid Option," if you try to set this value. Requires password None IVR announces the current network mask of SPA. Enter value using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. DHCP must be "Disabled," otherwise you hear, "Invalid Option," if you try to set this value. Requires password None IVR announces the current gateway IP address of SPA. Enter IP address using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. DHCP must be "Disabled," otherwise you hear, "Invalid Option," if you try to set this value. Requires password None IVR announces the MAC address of SPA in hex string format. None IVR announces the version of the firmware running on the SPA. None IVR announces the current setting in the parameter. Enter IP address using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. Requires password None IVR announces the port that the web server is listening on. (Default is 80) None IVR announces the current IP address of the LAN port. None IVR announces the current value. Enter IP address and port. Use * key for entering a dot. For example, 224.168.168.169:8089 is 224*168*168*169*8089. Enter a * between the IP address and the Port fields. Requires password Enter 1 to enable Enter 0 to disable Requires password 2-18 Linksys IP Phone Administrator Guide Firmware Version 5.1