Linksys WIP310 Cisco SPA9000 Voice System Administration Guide - Page 92

Configuring Phone Lines and Calling Routing Behavior Managing Inbound Calls with the Contact List 4 EXAMPLE: 4085555550:aa|4085555551:+101|4085555552:+102|4085555553:+10 3|4085555554:+104|4085555650:+500| • Enter a plus (+) or a minus (-) before the extension number to achieve the desired results for caller ID and call routing: • + The extension will be alerted when there is an incoming call to the DID number, and the DID number will be used as the local user-ID in outbound SIP requests, along with the display-name of the extension. • - The extension will not be alerted when there is an incoming call to the DID number. However, the DID number will be used as the local userID in outbound SIP requests, along with the display-name of the extension. DIDn#: DID number, matching the format of the number signaled in the SIP trunk • Extn#: Target extension number or a for Auto Attendant • Default route: The default route (extension, hunt group or Auto Attendant) to be used in case the incoming target number does not match any of the DID numbers in the contact list with the format described in the sections above. • Call forwarding: Optionally, add call forward information to the Contact List to specify how unanswered calls are handled. It is useful to add call forward information to ensure that calls are answered when the designated phone is unstaffed, as may be the case during lunch time or after hours. In this case, if the call is not answered within a specified time, the call is routed to another phone or to the Auto Attendant. SYNTAX: :+,cfwd=|:+,cfwd=|:+,cfwd= EXAMPLE: 4085555550:aa|4085555551:+101,cfwd=aa|4085555552:+102|4085 555553:+103|4085555554:+104|4085555650:+500| SPA9000 Voice System Administration Guide 90