Linksys WRT110-RM User Guide - Page 30
Status > Router, Status > Local Network, Router Information, Internet Connection, Local Network - firmware update
UPC - 745883585793
View all Linksys WRT110-RM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 3 Status > Router The Router screen displays information about the Router and its current settings. Advanced Configuration Status > Local Network The Local Network screen displays information about the local, wired network. Status > Router Router Information Firmware Version This is the version number of the Router's current firmware. Current Time This shows the time set on the Router. Internet MAC Address This is the Router's MAC Address, as seen by your ISP. Host Name If required by your ISP, this was entered on the Basic Setup screen. Domain Name If required by your ISP, this was entered on the Basic Setup screen. Internet Connection This section shows the current network information stored in the Router. The information varies depending on the Internet connection type selected on the Basic Setup screen. Click Refresh to update the on-screen information. Status > Local Network Local Network Local MAC Address The MAC address of the Router's local, wired interface is displayed here. Router IP Address This shows the Router's IP address, as it appears on your local network. Subnet Mask This shows the Subnet Mask of the Router. DHCP Server DHCP Server The status of the Router's DHCP server function is displayed here. Start IP Address For the range of IP addresses used by devices on your local network, the starting IP address is shown here. End IP Address For the range of IP addresses used by devices on your local network, the ending IP address is shown here. DHCP Clients Table Click this button to view a list of PCs that are using the Router as a DHCP server. RangePlus Wireless Router DHCP Clients Table 29