Linksys WVC54GC User Guide - Page 65
Options, Account Name, Password, Enable
UPC - 745883566754
View all Linksys WVC54GC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Compact Wireless-G Internet Video Camera Options The Options screen allows you to alter the Camera's e-mail alert features, UPnP configuration, and Alternate Port settings. E-mail Alert You can choose to be notified when the Camera detects motion in its field of view. You will be sent a text-only e-mail or an e-mail with video attached. NOTE: The Camera's motion sensitivity and range will vary depending on the light conditions of your environment. E-mail Alert. If you want to be notified by e-mail when the Camera detects motion, then select Enable from the drop-down menu. Otherwise, select Disable. Send to. In each field, enter an e-mail address that will receive e-mail alerts. (You can enter up to three e-mail addresses.) Show "From" as. Enter the text that you want displayed in the From field of any e-mail alert message. Subject. Enter the subject heading that you want to be used. Mail SMTP Server. Enter the IP address of the outgoing mail SMTP server. If it requires authentication, click the checkbox, and enter the account name and password in the Account Name and Password fields. Delay between E-mails. Specify the minimum time interval between e-mail alerts. The default is 2 minutes. E-Mail Video. If you want e-mail sent with a video attachment, select Enable from the drop-down menu. Then select the length of video you want, up to a maximum of 5 seconds. The default is 2 seconds. If you want textonly e-mail sent to you, select Disable from the drop-down menu. Motion Detection. To specify where and how the Camera should monitor for motion, click the Set Area & Sensitivity button. Two motion detection areas will be shown in windows labeled Area 1 and Area 2. Use your mouse to move them around to the areas you want the Camera to monitor. Sections labeled Detected Area 1 and Detected Area 2 show additional settings. For each area, click the checkbox next to Enable if you want that area monitored. Then slide the bar left (less sensitive) or right (more sensitive) to adjust the Threshold (sensitivity) level. Click the Save button to save your changes. Chapter 8: Using the Compact Wireless-G Internet Video Camera's Web-based Utility Setup Figure 8-22: Options Screen Figure 8-23: Options Screen, continued Figure 8-24: Motion Detection Screen 57