Linksys WVC54GCA-RM Quick Installation Guide - Page 5
admin, Refresh, WPA/WPA2-Personal, WEP 128-Bit, WEP 64-Bit, Disabled - default password
UPC - 745883582280
View all Linksys WVC54GCA-RM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Set IP address configuration manually Select this option if you want to manually assign a static IP address to the Camera. If you select this option, fill in the IP Address, Subnet Mask, and Gateway fields. L. If you want to keep the Camera's default password (admin), leave the fields unchanged and click Next. If you want to change the password, enter the new password, re-enter to confirm, then click Next. Enter the Static IP Address M. The Wizard will search for wireless networks, then list the wireless networks found. If the wireless network you want to connect to is not listed, click Refresh to update the list. Select the wireless network that you want to connect the Camera to, then click Next. N. The Wizard displays the wireless security method that your network is using: WPA/WPA2-Personal, WEP (128-Bit), or WEP (64-Bit). Follow the appropriate instructions below. If you are not using wireless security, select Disabled and go to step O.