Lowrance GoFree WIFI-1 Module WIFI-1 Installation Guide - EN - Page 1

Lowrance GoFree WIFI-1 Module Manual

Page 1 highlights

WIFI-1 Installation Guide English Installing www.bandg.com | www.simrad-yachting.com | www.lowrance.com *988-10401-003* Compliance statements This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Identifier: RAYGOFREEWIFI Specifications WIFI-1 features Marinised construction Wireless standards Ethernet network ports Automatic configuration Power supply Supported hotspot security References IPX5 802.11 b/g 2 Plug-n-play 12 V DC, 200 mA WPA-PSK, WPA2, WPE 64/128 bit encryption , TKIP encryption For a list of supported features or to download the latest software for your MFD please visit:: Dimensional drawing 171 mm (6.76") 154 mm (6.06") www.lowrance.com/gofree www.simrad-yachting.com/gofree www.bandg.com/gofree 156 mm (6.14") 52 mm (2.05") 25 mm (1.0") 187 mm (7.36") Wiring 1 9 +_ 8 2 4 4 5 76 Key Description 1 Multifunction display, SonarHub™, StructureScan™ or other WIFI-1 2 WIFI-1 Optional second WIFI-1 to use in Access Point mode when the primary WIFI-1 3 3 is in Client mode. Maintains the ability of mobile devices to connect to the navigation network 4 Ethernet cable 5 Power cable 6 Remote power on: WIFI-1 will turn on when power is applied 7 Fuse or breaker 8 12 V DC Remote power on: WIFI-1 will turn on 9 when the MFD is turned on (MFD needs to be set to power on master) Layout 4 12 5 23 Setup ¼¼ Note: Compatible MFDs are required to have software that can support the GoFree Shop features. Please refer to the support page of the MFD website to upgrade the MFD. The MFD will then check the firmware version of the WIFI-1 module and will prompt an upgrade if required. Select HOME or PAGES key Key Description 1 Antenna 2 Ethernet ports x 2 3 Power connector 4 Ethernet LEDs Green: port is active 5 Power LED Red: power on Upgrade the WIFI-1 software if prompted

  • 1
  • 2

*988-10401-003*
English
WIFI-1
Installation Guide
www.bandg.com | www.simrad-yachting.com | www.lowrance.com
52 mm (2.05”)
156 mm (6.14”)
25 mm
(1.0”)
187 mm
(7.36”)
171 mm (6.76”)
154 mm (6.06”)
Installing
Layout
Dimensional drawing
Setup
Upgrade the WIFI-1 software if prompted
Key
Description
1
Antenna
2
Ethernet ports x 2
3
Power connector
4
Ethernet LEDs Green: port is active
5
Power LED Red: power on
2
2
4
5
3
1
+
_
4
4
6
5
8
9
2
3
1
7
Key
Description
1
Multifunction display, SonarHub™,
StructureScan™ or other WIFI-1
2
WIFI-1
3
Optional second WIFI-1 to use in Access
Point mode when the primary WIFI-1
is in Client mode. Maintains the ability
of mobile devices to connect to the
navigation network
4
Ethernet cable
5
Power cable
6
Remote power on: WIFI-1 will turn on
when power is applied
7
Fuse or breaker
8
12 V DC
9
Remote power on: WIFI-1 will turn on
when the MFD is turned on (MFD needs
to be set to power on master)
Wiring
References
For a list of supported features or to download
the latest software for your MFD please visit:
:
www.bandg.com/gofree
www.simrad-yachting.com/gofree
www.lowrance.com/gofree
Compliance statements
This device complies with Part 15 of the FCC Rules and with Industry
Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Identifier: RAYGOFREEWIFI
Select HOME or PAGES key
WIFI-1 features
Marinised construction
IPX5
Wireless standards
802.11 b/g
Ethernet network ports
2
Automatic configuration
Plug-n-play
Power supply
12 V DC,
200 mA
Supported hotspot security
WPA-PSK, WPA2, WPE 64/128 bit
encryption , TKIP encryption
Specifications
¼
Note:
Compatible MFDs are required to have software that can support
the GoFree Shop features. Please refer to the support page of the MFD
website to upgrade the MFD.
The MFD will then check the firmware
version of the WIFI-1 module and will prompt an upgrade if required.