Lowrance HDS-7 LIVE HDS Live Installation Manual - Page 54
CZone setup, Assigning the dipswitch setting
View all Lowrance HDS-7 LIVE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
The CZone / NMEA 2000 Network interface bridge isolates the power of the two networks, but allows data to be freely shared between both sides. The Interface Bridge can also be used for expansion of the NMEA 2000 network, when the maximum node limit (node = any device connected to network) for the network has been reached or the maximum cable length of 150 m will be exceeded. Once an Interface Bridge has been fitted, a further 40 nodes and additional cable length can be added. The Network Interface is available from your BEP dealer. For more information please refer to the BEP web site www.bepmarine.com. NETWORK 67$786 5HG1HWZRUN *UHHQ1HWZRUN Network 1 Network 2 NETWORK INTERFACE CZONE NMEA2000 CZONE CZone setup In order to communicate with the CZone modules connected to the network, the unit must be assigned a unique CZone Display Dipswitch setting. The functionality of the CZone system is determined by the CZone Config File which is stored on all CZone modules and the HDS Live. The file is created using the CZone Configuration Tool, a specialized PC application available from BEP Marine Ltd, and associated CZone distributors. For more information, refer to the documentation provided with your CZone system. Assigning the dipswitch setting Every product capable of controlling and viewing CZone devices must be assigned a virtual dipswitch setting. This setting is unique for each device. Typically it is set after the configuration file already 54 3rd party support | HDS Live Installation Manual