Lowrance StructureScan HD Transom Installation Manual - Page 3

1 Installation preparation Accessories If you received this manual with a StructureScan accessory, you will notice that some information in the document does not apply to the accessory. This manual has installation instructions for your accessory, and accessory pack content tables on the back cover. Contents Your StructureScan box is packed with the StructureScan HD module, a Power cable, fuse and fuse holder, StructureScan transducer, mounting bracket, 15 foot (4.5m) ethernet cable and a hardware kit. The transducer has a 20 foot (6m) cable attached. Hardware Mounting Kit (included) Transom mount screws (2) Transducer attachment lock nuts (6) Bracket assembly bolts (2) StructureScan HD mounting screws (4) Bracket assembly washers (4) Closed end crimp connector (1) Bracket assembly nuts (2) Zip ties (2) Transducer attachment screws (6) Drill Drill bits Required tools and supplies (not included) Phillips (slotted-head screwdriver) Marine grade above-or-below waterline sealant StructureScan HD | Installation preparation | 3