MSI H55M User Guide - Page 45
MS-7636, connector., Hold on, All Error], No Error], The system doesn't stop for any detected error
View all MSI H55M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
MS-7636 ▶ IDE Primary Master/ Slave, SATA1~6 Press to enter the sub-menu and the following screen appears: ▶ Device / Vendor / Size It will show the device information that you connected to the IDE/ SATA/ ESATA connector. Important IDE Primary Master/ Slave, SATA1~6 are appearing when you connect the HD devices to the IDE/ SATA connectors on the mainboard. ▶ Hold on The setting determines whether the system will stop of an error is detected at boot. When the system stops of the errors preset, it will halt on for 15 seconds and then automatically resume its operation. Available options are: [All Error] The system stops when any error is detected. [No Error] The system doesn't stop for any detected error. ▶ System Information Press to enter the sub-menu, and the following screen appears. This sub-menu shows the CPU information, BIOS version and memory status of your system (read only). 3-7