MSI K8T NEO2-FIR User Guide - Page 35
D-Bracket™ 2 Connector: JLED Optional, Chassis Intrusion Switch Connector: JCASE1, Power Saving - specs
UPC - 816909005967
View all MSI K8T NEO2-FIR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
MS-6702E ATX Mainboard Chassis Intrusion Switch Connector: JCASE1 This connector is connected to a 2-pin chassis switch. If the chassis is opened, the switch will be short. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record. GND 2 CINTRU 1 JCASE1 Power Saving Switch Connector: JGS1 Attach a power saving switch to this connector. Press the switch once to have the system entered the Sleep/Suspend state. Press the switch again to wake up the system. JGS1 D-Bracket™ 2 Connector: JLED (Optional) The mainboard comes with a JLED connector for you to connect to D-Bracket™ 2. DBracket™ 2 is a USB Bracket that supports both USB1.1 & 2.0 spec. It integrates four LEDs and allows users to identify system problem through 16 various combinations of LED signals. 2 10 1 9 JLED Connected to JLED JLED Pin Definition Pin Signal 1 DBG1 (high for green color) 2 DBR1 (high for red color) 3 DBG2 (high for green color) 4 DBR2 (high for red color) 5 DBG3 (high for green color) 6 DBR3 (high for red color) 7 DBG4 (high for green color) 8 DBR4 (high for red color) 9 Key 10 NC D-Bracket™ 2 (Optional) Connected to JUSB1 or JUSB2 (the USB pinheader in YELLOW color) 2-22 LEDs