Mackie 1202-VLZ Pro Owner's Manual - Page 28

SPECIFICATIONS Main Mix Noise 20Hz-20kHz bandwidth, 1/4" Main out, channels 1-4 Trim @ unity gain, channel EQs flat, all channels assigned to Main Mix, channels 1 and 3 Pan left, 2 and 4 Pan right. Main Mix knob down, channel Gain knobs down: -100dBu Main Mix knob unity, channel Gain knobs down: -86.5dBu (90dB Signal to Noise Ratio, ref +4dBu) Main Mix knob @ unity, channel Gain knobs @ unity: -84.5dBu Total Harmonic Distortion (THD) 1kHz @ +14dBu, 20Hz-20kHz. Mic pre @ insert : 0.0007% Attenuation (Crosstalk) 1kHz relative to 0dBu, 20Hz-20kHz bandwidth, Line in, 1⁄4" Main Out, Trim @ unity Main Mix knob down: Channel Alt / Mute switch engaged: Channel Gain knob down: -85dBu -84dBu -83dBu Frequency Response Any input to any output 20Hz to 60kHz: 20Hz to 100kHz: +0dB/-1dB +0dB/-3dB Equivalent Input Noise (EIN) Mic in to Insert Send out, max gain 150 ohm termination: -129.5dBm unweighted Common Mode Rejection (CMR) Mic in to Insert Send out, max gain 1kHz: better than -90dB Maximum Levels Mic in: Tape in: All other inputs: Main Mix XLR out: All other outputs: +22dBu +16dBu +22dBu +28dBu +22dBu Impedances Mic in: Channel Insert return: All other inputs: Tape out: All other outputs: 1.3 kilohms 2.5 kilohms 10 kilohms or greater 1.1 kilohms 120 ohms EQ High Shelving Mid Peaking Low Shelving ±15db @ 12kHz ±12dB @ 2.5kHz ±15db @ 80Hz Power Consumption 120VAC, 50/60Hz, 25 watts Weight 6 lbs 8 oz. (3 kg) Dimensions 11.8" x 11.2" x 2.6" (300mm x 284mm 66mm) 6 rack spaces with optional rack ears (RM1202-VLZ) 11.8" (300mm) Mackie Designs is always striving to improve our mixers by incorporating new and improved materials, components and manufacturing methods. Because we're always trying to make things better, we reserve the right to change these specifications at any time, without notice. 11.8" (300mm) 1202-VLZ PRO WEIGHT 6.5 lbs. (3 kg) 2.6" (66mm) 11.2" - 6 rack spaces (284mm) 2.6" (66mm) 11.2" (284mm) 28