Magellan GPS 300 User Manual - Page 32
Changing Time Display and Time, Changing North Reference
UPC - 763357101874
View all Magellan GPS 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Changing Time Display and Time To change the way that time is displayed (12 HOUR default, 24 HOUR, or UT), repeatedly press MENU until SETUP is displayed at the top of the screen and press ENTER . Use the RIGHT ARROW until SETUP TIME is displayed. Press ENTER again and the time display begins to flash. Use the RIGHT/LEFT ARROWs to scroll through the list and press ENTER to select. The screen changes to TIME SET. Use the ARROW pad to set the time and press ENTER when done. (You are not prompted to set the time if you selected UT as the time format.) When you change your clocks because of daylight savings time, remember to change the time in your GPS 300. Changing North Reference The GPS 300 uses magnetic north as a default reference for all navigation computations. You can change this to true north (good if you are also using a map) or back to magnetic north (default, good to use if you are using a compass) under the SETUP menu. Press the MENU key until SETUP is displayed at the top of the screen and press ENTER . Use the RIGHT ARROW until SETUP NORTH REF is displayed. Press ENTER again, the north reference begins to flash. Use the RIGHT/LEFT ARROWs to scroll between MAGNETIC and TRUE and press ENTER to select. 28