Magnavox 27MS3404 User manual, English (US) - Page 10

USING THE S-VIDEO INPUT JACKS The S(uper)-Video connection on the rear of the TV can provide you with better picture detail and clarity for the playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and SVHS VCR (video cassette recorder) tapes than the normal antenna picture connections. NOTE: The accessory device must have an SVIDEO OUT(put) jack in order for you to complete the connection on this page. 1 Connect one end of the S-VIDEO CABLE to the S-VIDEO jack on the back of the TV. Then connect one end the AUDIO (red and white) CABLES to the AV2 in AUDIO L and R (left and right) jacks on the rear of the TV. 2 Connect other end of the SVIDEO CABLE to the S-VIDEO OUT jack on the back of the VCR. Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR. 3 Turn the VCR and the TV ON. 4 Press the CH + or CH- buttons to set the TV to its SVHS2 channel. (Go to your lowest channel, for example channel 1, then change channels down to find the correct source channel.) 5 Now your ready to place a prerecorded video tape in the VCR and press the PLAY ᮣ button. AV2 CVI AV1 24 Front SVHS 1 2 3 POWER 4 5 6 CH 7 8 9 CH A/CH 0 CC VOL STATUS VOL EXIT MENU SLEEP MUTE SURF SMART PICTURE SOUND MAGNAVOX Back of TV 2 Monitor out AV1 in VIDEO Y L/Mono AUDIO Pb AV2 in R Pr COMPONENT VIDEO INPUT 1 S-VIDEO Audio Cable (Red and White) S-Video Cable 4 2 L R AUDIO OUT VIDEO OUT S-VIDEO ANT/CABLE OUT OUT Back of VCR 1 3 VCR (Equipped with 5 S-Video Jacks) HELPFUL HINT The S-VIDEO and VIDEO AV2 in(puts) are in parallel. The S-VIDEO input is dominant when in use. If separate video signals are connected to the S-VIDEO and VIDEO AV2 in(puts), the signal from the VIDEO AV2 in(puts) will not be usable. Audio and S-Video cables are not supplied with the TV, but are available from Magnavox or electronics retailers. 10