Magnavox 32MD311B User manual, English (US) - Page 17

WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES English 17 INTRODUCTION PREPARATION TV Screen Display Mode 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. Press FORMAT repeatedly to switch the TV aspect ratio. For 16:9 video signal Normal 4:3 Wide Movie expand Zoom Normal displays a 16:9 picture at its original size. 4:3 displays a 16:9 picture at a 4:3 size; the picture is shortened horizontally. Sidebars appear on both edges of the screen. Movie expand displays a 16:9 picture that is vertically stretched to fill the screen.This only crops out the top of the picture. Zoom displays a 16:9 picture at its maximum size without changing its horizontal and vertical ratio. Wide displays a horizontally stretched picture.This crops out the left and right sides of the picture. For 4:3 video signal Normal 16:9 Wide For PC input signal through HDMI1 Movie expand Zoom Input mode Normal displays a 4:3 picture at its original size. Sidebars appear on both edges of the screen. 16:9 displays a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fill the screen. Movie expand displays a 4:3 picture at a 16:9 size; the picture is stretched more vertically at the top of the screen.This crops out the top of the picture. Zoom displays a 4:3 picture at a 16:9 size; at its maximum size that is more vertically stretched to fill the screen.This crops out the top and bottom of the picture. Wide displays the picture with its center at the original size and the edges stretched horizontally to fill the screen. Normal displays a proportionately stretched picture. Sidebars appear on both edges of the screen. Full displays a picture that is stretched out of proportion horizontally to fill the screen. Dot By Dot displays a picture in its original size. Normal Full Dot By Dot *For 22MD311B, 19MD311B and 19MD301B, PC input mode is available.They can only accept the PC input signal when the unit is connected to a PC (VGA) Input jack. USEFUL TIPS INFORMATION Sound Functions describe how to change the audio or the audio language as well as the volume. Volume Adjustment Use VOL + / − to adjust the volume. Silence Mode Volume 30 will be displayed for a few seconds when adjusting the volume. Press MUTE to turn off the sound temporarily. Mute will be displayed for a few seconds. • Press MUTE again or VOL + / − to recover the original volume. hi! salut! hola! Switching Audio Mode ATSC Press SAP/AUDIO repeatedly to cycle through the available audio languages. • Available languages differ depending on the broadcast. • [Other] is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. 11.1 English 1/3 NTSC Press SAP/AUDIO to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel. 11 SAP / STEREO e.g.) When all audio are available SAP / STEREO SAP / MONO SAP / STEREO STEREO : Outputs stereo-audio SAP : Outputs second audio program MONO : Outputs mono-audio