Magnavox 32MD311B User manual, English (US) - Page 33

English 33 INTRODUCTION Repeat Playback Random Playback PREPARATION Repeat function is available only during playback. 1 During playback, press MODE repeatedly until [ ] appears. 2 Press ▲/▼ to change the repeat mode. DVD OFF CHAPTER TITLE repeat off current chapter repeat current title repeat CD OFF TRACK ALL repeat off current track repeat entire disc repeat 3 Press BACK to exit. CD This function shuffles the playing order of tracks instead of playback in the sequence. 1 In stop mode, press MODE repeatedly until [RANDOM] menu appears. 2 Press PLAY B to start random playback. Note • To repeat the current track in the random mode, follow the steps 1 and 2 in [Repeat Playback] and select [ TRACK]. ➠ p.33 • To repeat the entire random selections, follow the steps 1 and 2 in [Repeat Playback] and select [ ALL]. ➠ p.33 Programmed Playback WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES Repeat A-B Playback You can repeat playback between A and B on a disc. 1 During playback, press MODE repeatedly until [ A B ] appears. 2 Press OK at your desired starting point (A). 3 Press OK at your desired ending point (B). • Point B should be in the same title or track as point A. • Within a few seconds, the section A-B will begin to play back repeatedly. 4 To cancel repeat A-B playback, press MODE repeatedly until [ A B ] appears. Press OK so [OFF] appears. Note • Repeat setting (except [ALL]) will be cleared when moving to another title or chapter, track. • During programmed playback, repeat setting will be effective for the tracks in the program. • Repeat playback or repeat A-B playback may not available with some discs. • Repeat A-B playback does not function during other repeat mode. • To cancel point A, press CLEAR at step 2 in [Repeat A-B Playback]. • Stopping playback will cancel repeat A-B playback. CD You may determine the order in which tracks will play back. 1 In stop mode, press MODE repeatedly until [PROGRAM] menu appears. 2 Use ▲/▼ to select a desired track, then press OK to store. • Additional tracks may be on other screens. Use ▲/▼ to go on to the next / previous pages. • Repeat this step until you have selected all the tracks you wish to play back in the program. • Up to 99 tracks can be ordered. • If 8 or more tracks were in a program, use SKIP H / G to see all the tracks. 3 Press PLAY B to start programmed playback. Note • Press CLEAR to erase the last track in the program if you make an error. • To erase all programmed tracks at once, select [ALL CLEAR] and press OK at step 2. • While a program is being played back, STOP C works as follows: - Pressing STOP C once:The track will be in the resume standby mode. Next time you press PLAY B, the playback will resume from the point where it is stopped in the programmed playback. - Pressing STOP C twice: Resume mode will be canceled. Next time you press PLAY B, playback will restart from the first track in the original order. However, your programmed playback can be restarted when you follow the above steps. (Your programs are still stored until either the disc is ejected or the unit goes into standby mode.) - On some discs, STOP C will not work while the resume message appears. Please wait until the message disappears. • To repeat the current track in the program, follow the steps 1 and 2 in [Repeat Playback] and select [TRACK]. ➠ p.33 • To repeat the entire program, follow the steps 1 and 2 in [Repeat Playback] and select [ALL]. ➠ p.33 • Ejecting the disc or the unit goes into standby mode will erase the program. • You cannot use the Number buttons to select another track during programmed playback. Use SKIP H / G to select other tracks in the program. • You cannot combine random playback with programmed playback. • You cannot alter a programmed order during playback. • You can start programmed playback only while in [PROGRAM] menu. USEFUL TIPS INFORMATION