Magnavox MBP5130 User manual, English (US) - Page 31

Note for "HDMI Video Resolution" • Even if you set "HDMI Video Resolution" setting to "Auto", when this unit is connected to a DVI compatible display devices with an HDMI-DVI cable, 480p signal will be output. • Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode. • You cannot change the video resolution during playback of Blu-ray Discs or AVCHD files. To change the resolution, stop playback. • In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed HDMI cable is recommended) and select "Auto" if the connected TV is compatible with 1080p24 frame input. • Even if the connected TV is compatible with 1080p24 frame input and you set "HDMI Video Resolution" setting to "Auto", when the contents of the disc are not compatible for 1080p24 frame, 1080p60 frame will be output. • If the picture is not output properly to the TV because of "HDMI Video Resolution", press and hold [B PLAY] on the front panel for more than 5 seconds. Both settings will be reset to the default automatically. • For AVCHD, 24-frame film material will be output as 60 frame, even if the connected device is compatible with 1080p24 frame input and "HDMI Video Resolution" is set to "1080p24"or "Auto". Audio Audio BD Audio Mode HDMI Audio Out Down Sampling DRC Mix Audio Output HDMI Multi (Normal) On Auto Setting items BD Audio Mode HDMI Audio Out *1 Down Sampling DRC Descriptions For BD, selects whether to output the secondary and interactive audio with primary audio if it is available or only the primary audio. Refer to "Setting the BD Audio Mode" on page 24. Sets the audio format for the audio output from HDMI OUT jack. Refer to page 32. Sets the digital audio output when playing back BD or DVD recorded in LPCM. Sets whether to compress the range of sound volume (dynamic range control) when Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio is played back. When "Auto" is selected,this unit detects DRC setting of the disc and set "DRC" setting to "On" or "Off" automatically when the discs recorded in Dolby TrueHD format are in playback. 1) Under following circumstances, "HDMI Multi(Normal)" and "HDMI Multi(LPCM)" are not available. - HDMI cable is not connected to HDMI OUT jack. - Connected TV is off. - Connected TV is not compatible with audio output. • To select the setting items and options, refer to " Custom" on page 30. • " Quick" menu consists of the setting menus frequently used, and they are accompanied with . 31