Magnavox MD699 Owners Manual - Page 8

Power Source 1. Connect one of the small plug from the supplied AC/DC Adapter to the DC IN jack of Decorative LED lights; connect the other small plug to the DC IN jack of the Main Unit as illustrated below. 2. Plug the AC/DC Adapter into a conveniently located AC outlet having AC 100-240V~, 50/60Hz. To DC IN jack of the Decorative LED Lights AC/DC Adapter DC IN DC 9V, 1300mA DC IN DC 9V, 1300mA LINE OUT L R To AC outlet To the DC IN jack of the main unit Notes: ~ This AC/DC Adapter is intended to be correctly orientated in a vertical or floor mount position. ~ For saving energy, if long period of time will not use the unit. Unplug the AC/DC Adapter from wall outlet. Operation General Operation: 1. Open the top cover as illustrated below: 2 1 2. Connect the unit to AC power as instructed earlier. 3. Turn the Power ON/OFF--Volume knob clockwise to power on the unit and set the volume to the desired level. The indicator will illuminate, and the LED light panel will light up. 4. Turn the Function selector to the desired position and set to different LED display modes by using the remote control. 5. For Decorative LED Lights: Press the LED ON/OFF button on the remote control repeatedly to turn it ON or OFF. Press the RED; GREEN or BLUE buttons on the remote control to set the color of the lights as desired. Press the LED 1 - LED 5 buttons on the remote control to set or reset the blinking mode of the lights as desired. 6. When finished listening: Turn the Power ON/OFF--Volume knob counterclockwise until "Click" is heard to shut off the unit. The indicators will not light. Press the LED ON/OFF button on the remote control to turn off the Decorative LED Lights. 7. Close the cover then lock it. 8