Makita BHP452HW Owners Manual - Page 2
Specifications - tool only
View all Makita BHP452HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ENGLISH SPECIFICATIONS Model BHP442 BHP452 Concrete 13 mm Steel 13 mm Capacities Wood 38 mm Wood screw 6 mm x 75 mm 10 mm x 89 mm Machine screw M6 M6 No load speed (min-1) High (2) Low (1) 0 - 1,400 0 - 400 0 - 1,500 0 - 400 Blows per minute High (2) Low (1) 0 - 21,000 0 - 6,000 0 - 22,500 0 - 6,000 Overall length 215 mm 215 mm Net weight 1.7 kg (BL1430) 1.8 kg (BL1830) Rated voltage D.C. 14.4 V D.C. 18 V • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. END001-1 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ・ Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENE039-1 Intended use The tool is intended for impact drilling in brick, concrete and stone as well as for drilling without impact in wood, metal, ceramic and plastic. For Model BHP442 ENG101-1 For European countries only Noise The typical A-weighted noise level determined according to 60745-2-1: Sound pressure level (LpA) : 79 dB(A) Uncertainty (K) : 3 dB(A) The noise level under working may exceed 85 dB (A). Wear ear protection. ENG203-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-1: Work mode: impact drilling into concrete Vibration emission (ah,ID) : 6.5 m/s2 Uncertainty (K) : 1.5 m/s2 ENG302-1 Work mode : drilling into metal Vibration emission (ah,D) : 2.5 m/s2 or less For Model BHP452 ENG101-1 For European countries only Noise The typical A-weighted noise level determined according to 60745-2-1: Sound pressure level (LpA) : 79 dB(A) Uncertainty (K) : 3 dB(A) The noise level under working may exceed 85 dB (A). Wear ear protection. ENG203-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-1: Work mode: impact drilling into concrete Vibration emission (ah,ID) : 6.5 m/s2 Uncertainty (K) : 1.5 m/s2 ENG302-1 Work mode : drilling into metal Vibration emission (ah,D) : 2.5 m/s2 or less ENH102-6 EC-DECLARATION OF CONFORMITY Model; BHP442,BHP452 We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents; EN60745, EN55014 in accordance with Council Directives, 2004/108/EC, 98/37/EC. CE2006 2