Makita BHP452HW Owners Manual - Page 9

1. Rear cover 1 2. Screws 2 performed by Makita Authorized Service Centers, always using Makita replacement parts. ACCESSORIES 008355 Raise the arm part of the spring and then place it in the recessed part of the housing with a slotted bit screwdriver of slender shaft or the like. 1 1. Recessed part 2. Spring 3. Arm 007428 2 3 Use pliers to remove the carbon brush caps of the carbon brushes. Take out the worn carbon brushes, insert the new ones and replace the carbon brush caps in reverse. 1. Carbon brush cap CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Drill bits • Tungsten-carbide tipped hammer bit • Phillips bit • Slotted bit • Socket bit • Blow-out bulb • Safety goggles • Various type of Makita genuine batteries and chargers • Hook • Rubber pad assembly • Wool bonnet • Foam polishing pad 1 007429 Make sure that the carbon brush caps have fit into the holes in brush holders securely. 1 1. Hole 2. Carbon brush cap 2 006304 Reinstall the rear cover and tighten two screws securely. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be 9