Makita GD0601 Owners Manual - Page 2

ENGLISH SPECIFICATIONS Model GD0601 Max. collet capacity 6 mm or 6.35 mm (1/4") Max. wheel point diameter No load speed (no) / Rated speed (n) 38 mm 25000(min-1) Overall length 359 mm Net weight 1.6 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. END202-3 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual. ･ DOUBLE INSULATION ･ Wear safety glasses. ･ Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENE050-1 Intended use The tool is intended for grinding ferrous materials or deburring castings. ENF002-1 Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. ENG019-1 For European countries only Noise and Vibration The typical A-weighted sound pressure level is 73 dB (A). The noise level under working may exceed 85 dB (A). Wear ear protection. The typical weighted root mean square acceleration value is not more than 2.5 m/s2. These values have been obtained according to EN50144. ENH101-7 EC-DECLARATION OF CONFORMITY Model; GD0601 We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents; EN60745, EN55014, EN61000 in accordance with Council Directives, 2004/108/EC, 98/37/EC. CE2006 000230 Tomoyasu Kato Director Responsible Manufacturer: Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN Authorized Representative in Europe: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND GEA001-3 General Safety Rules WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS. Work area safety 1. Keep work area clean and well lit. Cluttered and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. 2