Makita PW5001C Owners Manual - Page 12
Maintenance
View all Makita PW5001C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
MAINTENANCE 1 1. Exhaust vent 2. Inhalation vent 006104 CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. 2 The tool and its air vents have to be kept clean. Regularly clean the tool's air vents or whenever the vents start to become obstructed. 006105 Replacing dust cover brush Replace the brush on the dust cover shortly after its tip is damaged. To replace the brush, slide it in the direction of arrow as shown in the figure. The dust cover is used to reduce the risk of dust intrusion into tool body. Be sure to use the tool with the dust cover in place when operating. Should it be damaged, replace it with new one without fail. Long use and operation of the tool using much water causes buildup of dust inside the tool. To maintain the product safety and operate the tool with high efficiency, always check the exhaust vent at the back of tool. When you find buildup of dust in that area, ask Makita service center for cleaning inside of the tool. Never disassemble or clean the inside of the tool by yourself. Early request for cleaning is recommended at all times. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 12