Makita XVJ03Z XVJ03Z Instruction Manual - Page 7

3 1. Blade clamp Cover plate 2. Jig saw blade 3. Protrusions 1 1. Cover plate 2. Base 1 2 001910 Return the tool opener to its original position. After installing, always make sure that the blade is securely held in place by trying to pull it out. CAUTION: • Do not open the tool opener excessively, or it may cause tool damage. To remove the blade, open the tool opener to the position shown in the figure. Pull the saw blade out toward the base. 1. Jig saw blade 2 007503 Use the cover plate when cutting decorative veneers, plastics, etc. It protects sensitive or delicate surfaces from damage. Fit it on the back of the tool base. Anti-splintering device 1. Base 2. Anti-splintering device 1 2 1 001911 NOTE: • Occasionally lubricate the roller. Hex wrench storage 1. Base 2. Hex wrench 1 2 007504 For splinter-free cuts, the anti-splintering device can be used. To install the anti-splintering device, move the tool base all the way forward and fit it from the back of tool base. When you use the cover plate, install the anti-splintering device onto the cover plate. CAUTION: • The anti-splintering device cannot be used when making bevel cuts. Dust extraction The dust nozzle (optional accessory) is recommended to perform clean cutting operations. 1 1. Dust nozzle 2. Base 014139 When not in use, store the hex wrench as shown in the figure to keep it from being lost. 2 001921 To attach the dust nozzle on the tool, insert the hook of dust nozzle into the hole in the base. The dust nozzle can be installed on either left or right side of the base. 7