Marantz AV8003 IR Database "xcf file" for Marantz AV Receiver Common - Page 8

ADD IR CODE WINDOW y q t w e r q Learn IR This is used to learn the remote control codes from other remote controllers and set them in the action list. (Refer to page 7, lLearning IRz.) w My Database This loads and sets the IR codes registered in My Database. Specify the file saved in the PC to load the IR codes registered in My Database. e IR Database This loads and sets the IR codes from the IR Database containing the remote codes from various brands. (Refer to page 8, lIR Database Windowz.) r RC5/6 This uses direct key input to set the remote control codes RC-5, RC-5 Extension, RC-6 mode 0, RC-6 mode 6A used by Marantz. (Refer to page 9, lEdit RC5/RC6 Window (Direct Input Codez.) t Test IR This performs a test transmission of IR commands by sending a preset code from the remote controller connected to the PC. y Duration This is used to adjust the duration of the IR command. 6