Marantz NR1504 Owner's Manual in English - Page 110

Basic instructions Advanced instructions Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. • If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 97). • "Manual Setup" can be used without changing the settings. Please set if necessary. Setting items Setting details Speaker Config. Indicate speaker presence and select speaker size categories based on bass reproduction capability. NOTE Front : Set the front speaker size. • Large : Use a large speaker that can adequately play back very low bass frequencies. • Small : Use a small speaker that has inadequate playback capacity for very low bass frequencies. Note that for most multi-channel speakers, this is the best choice. Do not use the outward shape of the speaker to • When "Subwoofer" is set to "No", "Front" is automatically set to determine selection of a "Large". "Large" or "Small" speaker. • When "Front" is set to "Small", "Center" and "Surround" can not be Instead, use the frequencies set to "Large". set in "Crossovers" Center : Set the presence and size of the center speaker. (vpage 108) as the • Large : Use a large speaker that can adequately play back very low bass standard for determining frequencies. bass reproduction capability. • Small : Use a small speaker that has inadequate playback capacity for very low bass frequencies. Note that this is almost always the best choice. • None : Select when a center speaker is not connected. "Large" is not displayed when "Front" is set to "Small". Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. When "Front" is set to "Small", "Subwoofer" is automatically set to "Yes". Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back very low bass frequencies. • Small : Use a small speaker that has inadequate playback capacity for very low bass frequencies. Note that this is almost always the best choice. • None : Select when the surround speakers are not connected. Speakers Setting items Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Setting details Unit : Set the unit of distance. • Feet / Meters Step : Set the minimum variable width of the distance. • 1ft / 0.1ft • 0.1m / 0.01m Set Defaults : The "Distances" settings are returned to the default settings. • Reset : Reset to the defaults. • Cancel : Do not reset to the defaults. When you select "Set Defaults" and press ENTER, the "Resets all of the distance settings to the factory defaults?" prompt is displayed. Select either "Reset" or "Cancel", and press ENTER. Front L / Front R / Center / Subwoofer / Surround L / Surround R : Select speaker for distance setting. • 0.0ft - 60.0ft / 0.00m - 18.00m : Set the distance. • The speakers that can be selected differ depending on the "Speaker Config." (vpage 107) settings. • Default settings : Front L / Front R / Center / Subwoofer : 12.0 ft (3.60 m) Surround L / Surround R : 10.0 ft (3.00 m) • Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m). NOTE "Distances" cannot be set for speakers with "Speaker Config." (vpage 107) set to "None". v See overleaf Information 107 DVD