Marantz NR1604 Owner's Manual in English - Page 128
ENTER, Surr. Back R
View all Marantz NR1604 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Basic instructions Advanced instructions Setting items Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Setting details Unit : Set the unit of distance. • Feet / Meters Step : Set the minimum variable width of the distance. • 1ft / 0.1ft • 0.1m / 0.01m Set Defaults : The "Distances" settings are returned to the default settings. • Reset : Reset to the defaults. • Cancel : Do not reset to the defaults. When you select "Set Defaults" and press ENTER, the "Resets all of the distance settings to the factory defaults?" prompt is displayed. Select either "Reset" or "Cancel", and press ENTER. Front L / Front R / F. Height L / F. Height R / Center / Subwoofer / Surround L / Surround R / Surr. Back Lz / Surr. Back Rz : Select speaker for distance setting. z When the "Speaker Config." - "Surr. Back" setting (vpage 124) is set to "1spkr", "Surr. Back" is displayed. • 0.0ft - 60.0ft / 0.00m - 18.00m : Set the distance. • The speakers that can be selected differ depending on the "Amp Assign" (vpage 124) and "Speaker Config." (vpage 124) settings. • Default settings : Front L / Front R / F. Height L / F. Height R / Center / Subwoofer : 12.0 ft (3.60 m) Surround L / Surround R / Surr. Back L / Surr. Back R : 10.0 ft (3.00 m) • Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m). NOTE "Distances" cannot be set for speakers with "Speaker Config." (vpage 124) set to "None". Speakers Setting items Setting details Levels Test Tone Start : Output test tone. Set the volume of the test • Front L / F. Height L / Center / F. Height R / Front R / Surround R / tone to be the same when it Surr. Back Rz / Surr. Back Lz / Surround L / Subwoofer : A test tone is output from each speaker. is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker. z When the "Speaker Config." - "Surr. Back" setting (vpage 124) is set to "1spkr", "Surr. Back" is displayed. • -12.0dB - +12.0dB (0.0dB) : Adjust the volume. When "Levels" is adjusted, the adjusted values are set for all the sound modes. NOTE • "Levels" cannot be set for speakers with "Speaker Config." (vpage 124) set to "None". • When headphones are connected to the PHONES connector on this unit, you cannot set "Levels". Set Defaults : The "Levels" settings are returned to the default settings. • Reset : Reset to the defaults. • Cancel : Do not reset to the defaults. When you select "Set Defaults" and press ENTER, the "Reset all of the channel level settings to the factory defaults?" prompt is displayed. Select either "Reset" or "Cancel", and press ENTER. v See overleaf Information 125 DVD