Marantz PM-15S1G PM-15S1G User Manual - English - Page 23
HOW TO SET ID
View all Marantz PM-15S1G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH HOW TO USE AND SET FEATURES HOW TO SET ID If using the PM-15S1 by itself as a stereo amplifier, set the ID to "0". When the PM-15S1 is shipped from the factory, the ID is set to "0". When the ID is set to a number other than "0", the PM15S1 cannot be used for standalone operation. The ID number of the PM-15S1 appears on the display for about 3 seconds after power is activated. INPUT SELECTOR knob DISPLAY button When multiple PM-15S1s are connected, a unique ID number must be set for each one in order to distinguish between them. The PM-15S1 that centrally controls the other PM-15S1s takes ID 1. The PM-15S1 with ID 1 is called the "master". The other PM-15S1s that synchronize with the master are called "slaves" and take IDs "2" - "4". ID numbers must not be the same for any two units. Set ID numbers as follows. 1. While pressing and holding the DISPLAY button, press the POWER ON/OFF button. POWER ON/OFF button 2. Turn the INPUT SELECTOR knob to the desired ID number. When finished setting the ID number, turn power to the PM15S1 OFF. The setting is stored in memory and becomes active the next time power to the PM-15S1 activated. 19