Marantz RC9001 RC9001 User Manual - Page 12

RC9001 User Guide Downloading the Configuration File to the Control Panel To download the configuration file to the Control Panel, connect it to your PC with the USB cable enclosed and click the icon in Wizz.it Ex. When you connect the Control Panel to the PC, it will be recognized by the PC as a removable disk and added in the folder list of your Windows Explorer as 'RC9001'. In the right corner of your Windows taskbar, the following icon appears. If the Control Panel is not recognized, try the following options: • Unplug the Control Panel and try again a few seconds later. • Unplug the Control Panel, reset it and try again. • Check the USB settings on the PC. Note The Control Panel uses default Windows drivers for recognition. If the problem is not solved with the options described above, try installing the latest Service Pack for your Windows version or check the troubleshooting section of your operating system. Warnings Do not pull the USB cable out of the PC during transition of the configuration file. Messages regarding downloading appear in Wizz.it Ex. Support Replacing the Batteries The batteries in the Control Panel are Lithium Polymer batteries. It is advised to change the batteries when the operation of the Control Panel becomes unreliable. If you want to order new batteries, please contact your Marantz authorized dealer or Marantz customer service. Warning Replace the batteries only with original Marantz RC9001 batteries; otherwise the guarantee is no longer valid and hazardous situations could occur. Troubleshooting Macros do not work • Make sure you have defined the correct codes for your A/V equipment. • Insert sufficient delays in the macros to allow the equipment to start up properly. • Check for links to inactive buttons (i. e. buttons that do not contain a code nor link) in your macro. Delete these buttons or create a link to the code on the code page. • Verify that the button has not been reprogrammed. Ensure that the Action List contains the appropriate commands for the A/V equipment. 9