Marantz SC-7S2 SC-7S2 User Manual - Page 23

ENGLISH HOW TO OPERATE FUNCTION AND HOW TO SET UP 7 If using more than 1 SC-7S2 Set up the ID numbers to the respective SC-7S2s to identify each of the SC-7S2s. q Set up the ID No. switch for the main unit of the SC7S2 to control others, which is called unit. The ID No. set up will be indicated in the display window for 3 seconds when the unit is powered on. BALANCED REMOTE CONTROL IN ID NO. 12 3 4 5 6 OUT MODE STEREO BI-AMP stereo control amplifier sc-7s2 AC IN A SYNC B power Light Green BALANCED CONNECTION input selector 1 w COLD Set up 2 COLD(-) t3hHeOT(o+)ther SC-7S2s - which will be controlled by the Master. They are called units. The ID No. set up will be indicated in the display window for 3 seconds when the unit is powered on. BALANCED REMOTE CONTROL IN ID NO. 12 3 4 5 6 stereo control amplifier sc-7s2 AC IN A SYNC B OUT MODE STEREO BI-AMP power Light RED BALANCED CONNECTION input selector 1 e COLD T2 ChOeLD(-T) rim3 HOaT(+d) justment set by the Master, will be the same for all Slave SC-7S2s. r Once the set up for the Trim has been finished, press the TRIM button on the remote controller. The trim adjustment will move from Master to Slave. Then the indicator on the Front display of the Slave will illuminate Red, the Sync indicator will flash Red. RECORDER 2 stereo control amplifier sc-7s2 TRIM EXIT L input selector + A SYNC B power Light Red Flash Red t Please refer to p.18 for Trim adjustment. If the whole system consist of more than 3 units, please repeat the same procedure and set up the remaining units. Make sure to change the ID # in the SC-7S2 to match the ID # of the amplifier being adjusted. y Once you have completed the trim adjustment, press the EXIT button on the remote control. This concludes the adjustments and memorizes them. RECORDER 2 TRIM EXIT LINE 2 TONE + L R volume volume volume 19