Marantz SR-18EX User Guide - Page 14
DISPLAY, ENCODED CHANNEL STATUS indicators - specification
View all Marantz SR-18EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ENGLISH DISPLAY (3) (4) (5) (8) (9) (12) (2) (1) (6) (7) (10)(11) (1) Main Information Display This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of the unit's operation. (2) ENCODED SIGNAL indicators 2DIGITAL, 2SURROUND, dts and PCM When the selected input is a digital source, one of these indicators will light to display the specific type of signal in use. (3) Analog Input Indicator This indicator lights when an analog input source has been selected. (4) TUNER's indicators STEREO : This indicator illuminates when an FM station is being tuned in stereo. AUTO : This indicator illuminates when the tuner's Auto mode is in use. TUNED : This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality. (5) Multiroom Indicator This indicator lights when the multiroom system is active. (6) Sleep Indicator This indicator lights when the Sleep function is in use. (7) Copy Indicators This indicator lights when VCR1 COPY. TAPE, COPY, or DIGITAL COPY system is active. (8) Night Mode Indicator This indicator lights when the SR-19EX is in the Night mode, which reduces the dynamic range of digital program material at low volume levels. (9) PEAK indicator This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will light. If this happens, you should press the ATT button. (10) Attenuation indicator This indicator lights when the attenuation function is active. (11) Display Off indicator This indicator lights when the SR-19EX is in the display off mode. (12) ENCODED CHANNEL STATUS indicators These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, "L", "C", "R", "LS", "RS" and "LFE" will light up.If the digital input signal is 2 channel PCM-audio, "L" and "R" will be displayed. If Dolby Digital 5.1ch signal with Surround EX flag comes in, "L", "C", "R", "LS", "S" , "RS" and "LFE" will show. 9