Marantz SR9600 SR9600 RS232c Command Codes - Page 17

SR9600 RS-232C Control Specification Page: 17 / 25 Document Version [1.0] Multi Room B Tuner2 Frequency Multi Room B Tuner2 Preset Multi Room B Tuner2 mode Command VALUE UP DOWN Auto-UP Auto-DOWN VALUE UP DOWN SCAN Start SCAN Stop TOGGLE OFF(MONO) ON(AUTO) "MTF#0xxxxx" (xxxxx = freq.) "MTF#1" "MTF#2" "MTF#3" "MTF#4" "MTP#0ww" (ww = preset nr.) "MTP#1" "MTP#2" "MTP#3" "MTP#4" "MTM#0" "MTM#1" "MTM#2" Reply from Slave "MTF#xxxxx" (xxxxx = Frequency) if (xxxxx < 02000) band=AM; else band=FM; (ex."08750" = FM87.50MHz) "MTP#ww" (ww = current preset nr.) (ww = 01 ~??) "MTM#0"( - ), "MTM#1"(MONO), "MTM#2"(AUTO) 5-1-2. Specific Commands Auto status feedback Command from Host "AST:x" (x = '0' ~ 'F') (The product default is disabled all auto status feedback.) bit 3 : Layer 4 ( 1 = Enable, 0 = Disable) bit 2 : Layer 3 ( 1 = Enable, 0 = Disable) bit 1 : Layer 2 ( 1 = Enable, 0 = Disable) bit 0 : Layer 1 ( 1 = Enable, 0 = Disable) Reply from Slave same as command define Company Restricted