Maytag MDB9959SK Owners Manual - Page 22

Countertop Attachment: 32. Insert bracket Tabs must point to the right. 34. Install bracket for Side Attachment Bend tabs Remove the brackets from the package, and insert into the open slots on the left- and right-hand top of the dishwasher collar as shown. 32a. Counter top attachment Push bracket into slot on the side of dishwasher, and bend tab in toward the side of the dishwasher so that it keeps the bracket in place. Repeat this step for the other side of the dishwasher. NOTE: Install wood shims to the inside of the cabinets if the gap between the sides of the cabinet and the sides of the dishwasher are greater than 1/2" (1.3 cm) on each side. NOTE: Do not attach the dishwasher. This will be done later. FINAL INSTALLATION CHECK 35. Open and close door Using pliers, bend/twist tab to lock the brackets in place. Side Attachment: 33. Break end of bracket for side attachment Top score line for stainless steel tubs Bottom score line for plastic tubs 36. Align front of dishwasher with front of cabinet doors Break off the end of the bracket along the scored line using pliers. Use sandpaper to smooth any burrs. Align front of dishwasher door panel with front of cabinet doors. You may need to adjust alignment to be even with your cabinets. 22