Maytag MEDB700BW Installation Guide - Page 19
Reverse the, strike, Reinstall the door
View all Maytag MEDB700BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Reverse the strike 1. Remove the door strike from the dryer door opening. 2. Remove the cosmetic screw opposite the door strike. A B 4. Install the two hinges to the front panel of the dryer using 4 screws. Use the non-slotted side to attach the hinge to the front panel. 5. Install screws in top hinge holes in the door. Do not tighten screws. Leave approximately 1/4" (5 mm) of screw exposed. A . Door strike B. Cosmetic screw 3. R einstall the door strike and cosmetic screw on the opposite side of dryer door opening from where they were removed. NOTE: Door strike and plugs must be on the same side of the dryer door opening. Reinstall the door 1. Remove the 4 screws and two hinges from the dryer door. 6. Hang door by placing screw heads into top slotted holes of hinges and slide door down. Align bottom screw holes in hinge and door. Install two bottom screws. Tighten all hinge screws. 2. Replace the 4 screws in the same holes 3. Remove the 4 screws from the opposite side of the door. 7. Close door to engage door strike. 19