Maytag MGD6000XR Owners Manual - Page 9
Cycle Guide - Timed Cycles, Cycle Guide - Steam Cycles
View all Maytag MGD6000XR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CYCLE GUIDE - TIMED CYCLES Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Adjusting drying time on Timed Cycles + - temp level dryness leve When you select a Timed Cycle, the default time appears in the display. Use the + and - buttons to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments. The maximum dry time is 100 minutes. Selecting the Drying Temperature A High heat setting may be used for drying heavyweight items such as towels and work clothes. A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits. Use a no heat (air dry) setting for foam, rubber, plastic, or heatsensitive fabrics. Line dry bonded or laminated fabrics. NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions. Items to dry: Drying Default Available Cycle: Temperature: Time: Options: Small loads and Small Load sportswear High Medium Low Extra Low Air Only 18 Wrinkle Prevent† Any load Timed Dry High 40 Wrinkle Prevent† NOTE: Select Air Medium Only to dry foam, Low rubber, plastic, or Extra Low heat-sensitive Air Only fabrics. Cycle Details: For small loads of 3-4 items. Use to dry items to a damp level for items that do not require an entire drying cycle. Select a drying temperature based on the type of fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting. † Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings CYCLE GUIDE - STEAM CYCLES Settings and options shown in bold are default settings for that cycle. Not all settings and options are available on each cycle. Steam cycles are designed for use with dry loads to loosen wrinkles, remove odors, and refresh fabrics. Items to refresh: Drying Default Available Cycle: Temperature: Time: Options: Shirts, blouses, Auto Medium 15 Wrinkle Prevent† and slacks Refresh Reduce Static Mixed Loads Custom High 22 Wrinkle Prevent† Refresh Medium Reduce Static (on some models) Cycle Details: Use to reduce odors and light wrinkles from small loads of dry items. Dry time will automatically adjust when the load size is sensed. Cycle run time cannot be manually adjusted. Do not add dryer sheets. Use to reduce wrinkles, including from loads left in the dryer too long. For larger loads, you may add additional time up to 50 minutes in 5 minute increments using the Timed Dry adjust buttons. Temperature is selectable. Do not add dryer sheets. † Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings. Load Size Recommendations For best results, follow the load size recommendations noted for each cycle. Small load: Fill the dryer drum with 3-4 items, not more than 1/4 full. Medium load: Fill the dryer drum up to about 1/2 full. Large load: Fill the dryer drum up to about 3/4 full. Do not overload. Items need to tumble freely. 9