Maytag MHW6630H Owners Manual - Page 49

TROUBLESHOOTING First try the solutions suggested here or visit our website at www.maytag.com.tw. If you experience Possible Causes Washer not performing as expected (cont.) Load not rinsed (cont.) Washer not loaded as recommended. The load may be out of balance. Load is wrinkled, twisted, Washer not loaded as or tangled recommended. Not cleaning or removing stains Wash action too long for load. Spin speed too fast for load. The washer is not unloaded promptly. Not choosing the right cycle for the load being washed. The wash water was not warm enough to relax wrinkles. Washer not loaded as recommended. Not using HE detergent or using too much HE detergent. Hard water or high level of iron (rust) in water. Fabric softener dispensing ball used. Powdered detergent used for slow-speed cycle. Solution Avoid tightly packing the washer. The washer will not rinse well if tightly packed. Load with dry items only. See the "Cycle Guide" for load size recommendations for each cycle. Use cycle designed for the fabrics being washed. Add only 1 or 2 garments after washer has started. When load unbalance occurs, a washing process will start to redistribute the load. This may lengthen the cycle time. Avoid washing single items. Balance a single item, such as a rug or jeans jacket, with a few extra items. Add load loosely. Items need to move freely to reduce wrinkling and tangling. See the "Cycle Guide" for load size recommendations for each cycle. Reduce tangling by mixing types of load items. Use the recommended cycle for the type of garments being washed. Select a lower soil level. Note that items will not be cleaned as deeply as when using a higher soil level. Select a slower spin speed. Note that items will be wetter than when using a faster speed spin. Unload the washer as soon as it stops or use Fresh Hold/Fresh Spin option if you will not be able to unload the washer at the end of the cycle. Use the Delicates cycle or another cycle with a slow spin speed to reduce wrinkling. If safe for load, use warm or hot wash water. Add load loosely. Items need to move freely for best cleaning. See the "Cycle Guide" for load size recommendations for each cycle. Add only 1 or 2 garments after washer has started. Use only HE detergent. Always measure detergent and follow manufacturer's directions based on load size and soil level. You may need to install a water softener and/or iron filter. Dispensing balls will not operate correctly with this washer. Add liquid fabric softener to the fabric softener compartment. Consider using liquid detergent. 49