Maytag MVWB835DC Use & Care Guide - Page 11

8. Select cycle 10. Select SOIL LEVEL Once you select a cycle, select the soil level by touching the Soil Level button to the desired setting. 11. Select cycle options, if desired Turn cycle knob to choose your wash cycle. 9. Select Temperature Once you select a cycle, select the wash temperature by touching the Temperature button to the desired setting. NOTE: Always read and follow fabric care label instructions to avoid damage to your items. If not sure on which temperature to use, refer to the chart below or select a cooler temperature. If you would like to add an Extra Rinse and/or Oxi option, touch the button for that feature. 12. T ouch and hold START/Pause button to begin wash cycle Light soils Colors that bleed or fade Moderate soils Bright colors Heavy Soils Whites Pastels NOTE: Even for cold wash settings, some warm water may be added to the washer to maintain a minimum temperature. Touch and hold START/PAUSE button for 3 seconds to start the wash cycle. When the cycle has finished, the end of cycle signal will sound (if set). Promptly remove items when cycle is done to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps. Unlocking the lid to add items If you need to open the lid to add 1 or 2 missed items: Touch START/PAUSE button to pause washer; the lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at a high speed. Then close lid and touch and hold START/PAUSE button again for 3 seconds to restart the cycle. IMPORTANT: If lid is left open for more than 10 minutes the water will pump out and F8E6 error code will appear on the display. 11