Maytag MVWB955FC Use & Care Guide - Page 11

8. Select cycle 9. Select cycle modifiers Turn the cycle knob to choose your wash cycle. For more information, see "Cycle Guide." Estimated Time Remaining will light up with a cycle time. You may notice time adjusting during the cycle. This is normal. If you do not want to begin a cycle immediately, you may choose Delay Start option. To choose a delay time: 1. Touch DELAY START button to select desired delay time. Time will increase in hour increments up to 12 hours. 2. Press and hold the START/PAUSE button to start delay start time. IMPORTANT: When delaying a cycle, use liquid HE detergent only in the dispenser. Powdered detergents may absorb moisture from a previous cycle and clump before the wash cycle begins. To cancel Delay Start: 1. Touch POWER to cancel Delay Start. To pause Delay Start: 1. Touch START/PAUSE button to pause Delay Start. 2. Touch START/PAUSE button again to start Delay Start time. Once you select a cycle, the default modifiers or the previous set modifiers for that cycle will be lit. Touch the cycle settings buttons to change the Wash Temp, Soil Level, and Spin Speed, if desired. Not all settings are available with all cycles. NOTE: Always read and follow fabric care labels instructions to avoid damage to your items. If not sure on which temperature to use, refer to the chart below or select a cooler temperature. Temperature suggestions Light soils Colors that bleed or fade Moderate Heavy Soils soils Whites Bright colors Pastels NOTE: Even for cold wash settings, some warm water may be added to the washer to maintain a minimum temperature. 11