Memorex MLT2022 User Guide - Page 24

ADDING AND SKIPPING CHANNELS After setting channels into memory, you can add or delete channels as follows: 1 2 2 1 3 Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV; the POWER indicator will light green. Press the TV/VIDEO button 2 repeatedly to select the TV mode. Select a channel to delete or add using the Direct Channel Selection/Number (0-9) buttons 3. Press the ENTER/MENU button 1; the Video Menu screen will appear. Press the CHANNEL/Navigation UP 2 or DOWN 3 button to select TV SETUP, then press the ENTER/MENU button 1 to select it. 3 Press the CHANNEL/Navigation UP 1 or DOWN 2 button until ADD/ERASE is selected. Select ADD or ERASE using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. Press the FREEZE/EXIT MENU button 5 to confirm and exit the menu. If ERASE is selected, the channel will be skipped when using the CHANNEL/Navigation UP 1 or DOWN 2 button. NOTE: The adding and skipping channels function : If the channel is erased, you cannot use the Channel/Navigation UP or Down button to select that channel. You only can use the Direct Channel Selection/ Number (0-9) buttons to select that channel. Add the channel again so you can select that channel using the Channel/Navigation UP or Down button. 23