Memorex MVDP1078 User Guide - Page 17

SETUP MENU (CONTINUED) SYSTEM SETUP MENU: Press the SETUP button to enter the menu, select SYSTEM SETUP using the Navigation (√,®) buttons, then press the Navigation (†) button to select it. Select/change the Setup option as described on page 15. TV SYSTEM (For AV Out only) 1 SCREEN SAVER 1 SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD MEMORY DEFAULT SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD MEMORY DEFAULT PAL: Select when using a PAL TV. NTSC: Select when using a NTSC TV. IMPORTANT: In the USA, the standard is NTSC. When this option is set to ON, the screen saver will come on when the unit stops for approximately three minutes. When this option is OFF, the screen saver will not come on. TV TYPE 1 PASSWORD 1 SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD MEMORY DEFAULT SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD MEMORY DEFAULT 4:3 PS, Pan Scan: Video material formatted in the Pan Scan style is played back in that style (the left and right edges are cut off). 4:3 LB, Letterbox: Wide-screen images are shown on the screen with a black band at the top or bottom. 16:9, Wide: Select when the unit is connected to a wide-screen TV. To change the password, press the Navigation (®) button to enter the password input section. Enter the default password ("1234") using the Number buttons if this is the first time entering the password, then press the OK button to confirm. When the correct password is entered, the Lock icon will be opened. Press the Navigation (®) button again and enter the new password using the Number buttons and then press the OK button to confirm; the Lock icon will be locked again and the password will be changed. NOTE: If the old password is incorrect, the Lock icon will not be opened. 16