Miele DA 3490 Operating and Installation manual - Page 31
Install the front panel if necessary 31, Weight of the front panel - installation manual
View all Miele DA 3490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installation Weight of the front panel The weight of the front panel must not exceed 2.8 lbs (1.3 kg). This applies for front panels with a depth of up to 1 1/4" (30 mm). In the case of front panels of greater depth or greater weight, the weight must be reduced by milling out the back of the panel, for instance. ^ Connect the space bar from the rear with 4 plastic rivets at the hood rear side. 5. Install the front panel if necessary The installation kit DML 400 is necessary. It can be obtained as an optional accessory from Miele. The installation kit has an installation manual supplied. ^ The deflector can be adjusted up to 1 3/8" (35 mm) towards the front with the two adjusting screws left and right in the deflector. Adjust the deflector until it is flush with the front of the adjacent cabinetry. 31