Miele Dimension G 4570 SCVi Operating and Installation manual - Page 34
Factory default 34, The Intake/Drain indicator flashes
View all Miele Dimension G 4570 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Additional options Factory default All settings can be reset to factory default. ^ Open the door. ^ Turn the dishwasher off with the V button. ^ Press and hold the Program button and turn the dishwasher on simultaneously using the K button. Keep the Program button pressed for at least four seconds until the lower right program indicator lights up. If it does not come on, start over. ^ Press the Program button briefly 12 times. The "Intake/Drain" indicator flashes once long and twice short. The sequence of flashing by the upper right program indicator shows whether a setting has been set differently to the default setting. - upper right program indicator flashes: all values are set to the default settings. - upper right program indicator is off: at least one setting has been changed. ^ To reset the dishwasher to factory default press the "Program" button (for at least one second) until the "Intake/Drain" indicator lights up. ^ Now press the Program button briefly. The setting is saved immediately. ^ Turn the dishwasher off with the V button. 34