Miele Dimension G 4570 SCVi Operating and Installation manual - Page 37

General problems with the dishwasher 37, interior walls are still

Get Miele Dimension G 4570 SCVi PDF manuals and user guides View all Miele Dimension G 4570 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Frequently Asked Questions General problems with the dishwasher Problem Possible fault Solution The display is dark and only the " U " indicator lights. The indicator lights go out automatically to save energy (Standby). Press any button (except V) to come out of Standby mode. Detergent residue is The dispenser was damp Dry the dispenser before left in the dispenser at when detergent was added. adding detergent. the end of a program. The detergent dispenser lid cannot be closed properly. Detergent residue is blocking the catch. Remove the residue. The door and the interior walls are still wet after a program has finished. This is not a fault! None! It is the normal operating The moisture will mode of the drying system. evaporate after a short time. Water remains in the wash cabinet at the end of a program. Before fixing the fault: - Turn the dishwasher off with the V button. The triple filter in the wash Clean the triple filter (see cabinet is clogged. "Cleaning and care"). The drain pump or the non-return valve may be blocked. Clean the drain pump and the non-return valve (see "Cleaning and care"). The drain hose is kinked. Remove any kinks from the drain hose. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
General problems with the dishwasher
Problem
Possible fault
Solution
The display is dark
and only the "
U
"
indicator lights.
The indicator lights go out
automatically to save
energy (Standby).
Press any button (except
V
) to come out of Standby
mode.
Detergent residue is
left in the dispenser at
the end of a program.
The dispenser was damp
when detergent was added.
Dry the dispenser before
adding detergent.
The detergent
dispenser lid cannot
be closed properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
interior walls are still
wet after a program
has finished.
This is not a fault!
It is the normal operating
mode of the drying system.
None!
The moisture will
evaporate after a short
time.
Water remains in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Turn the dishwasher off
with the
V
button.
The triple filter in the wash
cabinet is clogged.
Clean the triple filter (see
"Cleaning and care").
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve (see
"Cleaning and care").
The drain hose is kinked.
Remove any kinks from the
drain hose.
Frequently Asked Questions
37