Motorola H3 User Manual - Page 1

Start Here > > > H3 Bluetooth® Handsfree Headset Get Connected in 4 Quick Steps 1 - CHARGE YOUR HEADSET 2 - PUT HEADSET IN PAIR MODE 3 - PAIR PHONE WITH HEADSET 4 - TEST AND USE BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H3 Handsfree Headset. Earhook Microphone Call Button Volume Buttons Blue Indicator Light 1 CHARGE YOUR HEADSET Charge your headset's battery for 2 hours: 1 Plug the Motorola charger into the end of the headset. The blue indicator light turns on when the battery is charging. It may take up to 1 minute for the light to turn on. When the headset's battery is fully charged (about 2 hours), the blue indicator light turns off. 2 Unplug the charger from the headset. Note: Headset is not functional while charging. 2 PUT YOUR HEADSET IN PAIRING MODE Before you can use your headset, you must pair (link) it with your phone. Call Button Blue Indicator Light With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. Note: The blue light will flash as you press and hold the Call button. Continue holding down the Call button until the blue light is steadily lit. Note: If you let go of the Call button before the blue light is on and steady, ensure that your headset is off before trying again. Note: To turn off headset, see "Turning Headset On/Off" on the reverse side of this guide. Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809498A97-O MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005. 3 TURN ON BLUETOOTH ON YOUR PHONE AND PAIR WITH HEADSET Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. To turn on Bluetooth: 1 Select M((Menu) > Settings > Connection > Bluetooth Link > Setup. 2 Scroll to Power. 3 Press Change. 4 Select On. 5 Select Back. 6 Select Handsfree. TURN ON BLUETOOTH ON YOUR PHONE AND PAIR WITH HEADSET Continued 7 Select [Look for Devices]. Note: Do not select STOP--you will automatically be taken to the next screen. 8 Select Motorola H3. 9 Select Yes to bond. 10 Enter the passkey 0000 and select OK. When your headset and phone are successfully paired, the blue light on your headset will change from steadily lit to flashing. Note: This procedure is for most Motorola phones. For other phones, see your phone's user's guide or visit www.hellomoto.com/bluetoothsupport and click Set Up My New Product. 4 TEST AND USE Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headset over your ear. See "Wearing the Headset" on the reverse side of this guide. 2 On your phone, dial the number you want to call and press the Send key. 3 If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset. TROUBLESHOOTING My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 2). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 3). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 3). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support. USING YOUR H3 See Features and Functions Guide on the reverse side of this guide for information on using your H3.