NEC 4T-B70CT1U 4T-B70CT1U 4T-B80CT1U Setup Guide - Page 8

Mounting Precautions

Page 8 highlights

Mounting Precautions • This product is for indoor use. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. • Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. • Use the monitor with the surface perpendicular to a level surface. • When moving the monitor, be sure to hold the handles or the parts marked by below. Do not grasp the screen. This may cause product damage, failure, or injury. Service covers • This monitor should be used at an ambient temperature between 41°F (5°C) and 95°F (35°C). Provide enough space around the monitor to prevent heat from accumulating inside. 2 [50] 7-7/8 [200] Unit: inch [mm] 1-7/16 [35] 2 [50] 2 [50] • If it is di icult to provide su icient space for any reason such as the installation of the monitor inside a housing or of several units side-by-side, or if the ambient temperature may be outside of the range of 41°F (5°C) to 95°F (35°C), install a fan or take other measures to keep the ambient temperature within the required range. • Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. • Do not place the monitor on a device which generates heat. • Do not use the product in locations where the unit is exposed to direct sunlight or other strong light. Since this product operates with infrared rays, such light may cause a malfunction. • When using multiple monitors closely, be sure the infrared transmitter/receiver does not a ect the other ones. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

7
Service
covers
Unit: inch [mm]
7-7/8 [200]
2 [50]
2
[50]
2
[50]
1-7/16 [35]
This product is for indoor use.
A mounting bracket compliant with VESA specifications is required.
Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor.
Mounting the monitor on the wall requires special expertise and the work must be performed
by an authorized SHARP dealer. You should never attempt to perform any of this work yourself.
Our company will bear no responsibility for accidents or injuries caused by improper mounting
or mishandling.
Use the monitor with the surface perpendicular to a level surface.
When moving the monitor, be sure to hold the handles or the parts marked by
below.
Do not grasp the screen. This may cause product damage, failure, or injury.
If it is difficult to provide sufficient space for any reason such as the installation of the monitor
inside a housing or of several units side-by-side, or if the ambient temperature may be outside
of the range of 41°F (5°C) to 95°F (35°C), install a fan or take other measures to keep the
ambient temperature within the required range.
Temperature condition may change when using the monitor together with the optional
equipments recommended by SHARP. In such cases, please check the temperature condition
specified by the optional equipments.
Do not block any ventilation openings. If the temperature inside the monitor rises, this could
lead to a malfunction.
Do not place the monitor on a device which generates heat.
Do not use the product in locations where the unit is exposed to direct sunlight or other strong
light. Since this product operates with infrared rays, such light may cause a malfunction.
When using multiple monitors closely, be sure the infrared transmitter/receiver does not affect
the other ones.
This monitor should be used at an ambient
temperature between 41°F (5°C) and 95°F
(35°C). Provide enough space around the
monitor to prevent heat from accumulating
inside.
Mounting Precautions